Prowater Limited
Unit 6 Midland Court
Midland Way
Barlborough
Derbyshire
S43 4UL
Tel: 08452 603310
Fax: 01246 819064
Website: www.prowater.co.uk
E-mail: enquiries@prowater.co.uk
ChloriDos™ Batch Unit
The ChloriDos™ Batch Unit accurately generates Chlorine Dioxide for use in water services particularly where more than one process is being dosed. It is used to disinfect water and control legionella and other potentially harmful pathogens. ChloriDos™ technology generates in situ, within a safe, self contained reactor unit, Chlorine Dioxide concentrates between 1% and 5% either by acid/chlorite method or stabilised Chlorine Dioxide pre cursor and activator. The Chlorine Dioxide solution is then further diluted (to below 2g/l) into a motive water stream and stored in a holding tank ready to be dosed into the separate processes on site when demanded. Installations are typically for multi demand production processes.
Chlorine Dioxide Generation, Dosing and Monitoring
General Technical Data
- Constant 300 litre supply
- Volt free outputs for connection to BMS systems
- Integrated shelf for 2 process pumps
- Internal power connections for 2 process pumps
- Remote alarm terminals
- Remote stop facility
- Batch count
- Connections for gas detector (auto shut off)
- Individual process dosing controlled independently
- Max operating pressure 8 Bar
- Sight glass for visual ClO2 indication
- Enclosed reactor with flush facility
- Carbon filtered tank breather vent
- Retractable rigid process pump suction assemblies
- Safe self contained bund unit
- Superior build quality for trouble free operation
All ChloriDos™ Batch Unit systems are supplied fully wet/pressure tested to 6 Bar (ClO2 reaction vessels 15 Bar), with fully configured control software, completed operational diagnostic checks, unique ID serial numbers and full documentation.
| ChloriDos™ Technical Data | |
|---|---|
| Description | Code |
| Mains supply | 230V ±10% 50Hz 30mA RCBO protection recommended (6A) |
| Power Consumption | 450 W |
| Aux Power | Rated 2A at 230V |
| General alarm output | Rated 6A at 230V (resistive) |
| Water meter input | Pulse/pulse-frequency |
| Max operating pressure | 8 Bar |
| Water supply pipe connection | 1/2 " PVC unions |
| Max Production | 300 / 550 litres/hour |
| Tank capacity | 100 litres |
| Tank breather filter media | Carbon granules |
| Binary Pumps | 208-6.0 / 208-14.0 |
| Process Pumps | Dependant on process dosing demands |
| Process pump suction ass. | DN8 connection |
| Dosing concentration | 2 - 5% |
| Environmental protection level |
IP65 |
| Skid dimensions | 1200 x 1600 x 650mm |
| Weight | 55 kg |
- Binary pumps mounted on reagent storage tanks (powered and controlled by batch unit)
- External isolators and connections for remote
binary pumps - Process pumps mounted on batch unit above batch tank (powered from batch unit but controlled separately)
- Level switches on each binary pump stop generation if either chemical gets low
- Retractable rigid suction lances on process bumps for extended service life and safer servicing of foot valves
- Easy change carbon filter media (tank breather)
- Solenoid valve to prevent over filling of batch tank
- High level switches on tank operate audible alarm and stop generation to prevent over batching
| ChloriDos™ Model | Product Description | Typical ClO2 production g/h |
|---|---|---|
CDS-B-560-1400 |
Batch Unit (208-14 E22 binary pumps) | 0 - 1400 g/h |
Optional Ancillaries
| Conex Analyser (Dia 1) (for individual processes) |
Remote beacon (230V IP65) |
8-X195 |
|---|---|---|
Gas Detector 307-2000-1 |
Tmac remote monitoring | 14-TMAC-MINI |
| Download |
|---|
ChloriDos™ Batch Unit - PDF Data Sheet